How to Fix “Ethernet Doesn’t Have a Valid IP Configuration” Problem

Windows 10 users have frequently been seeing the error message that says “Ethernet Doesn’t Have a Valid IP Configuration”. This error message results in the unavailability of an internet connection. Why? Because your Ethernet connection doesn’t have a valid IP address and your device is failing to identify that invalid IP address.

You might be wondering what IP address is? Let’s look into it first and see why it is so important.

Your PC needs some components to make sure that the internet connection stays up and running. An IP address is one of them.

IP – Internet Protocol address is a unique address that uses an IP-based network to make the communication successful between two devices over any internet network.

So, when you are not successful in getting a valid IP configuration, it’s because your PC denies connecting to your internet network.

As frustrating and irritating as this issue can be, it is easier to get rid of this error message, All you need to do is apply workable fixes.

We have listed down top fixing methods to solve the error “Ethernet Doesn’t Have a Valid IP Configuration”. Keep reading.

Before we jump to the solutions, let’s first look at the possible reasons for this invalid IP error.

Why Exactly Are You Seeing “Ethernet Doesn’t Have A Valid IP Configuration” Error? What Might Cause This Issue ?

When DHCP (Dynamic Host Configuration Protocol) fails to deliver a valid IP address or configuration to your Ethernet connection, the Windows Connection Troubleshooter displays an error code if invalid IP configuration.

DHCP is a network protocol that allows the servers to generate and assign unique IP addresses to your computer for an internet network. So, when the DHCP fails to serve its purpose, your computer is unable to utilize any assigned, valid IP address assigned.

In this way, your access to Ethernet gets disrupted.

There are several reasons for this error to show up.

For Example; Invalid IP configuration, faulty network configuration settings, outdated or old network adapters, faulty settings in router or modem, outdated drivers, temporary network glitch, etc.

Here you have all the possible causative agents of this error. By now, you must have an idea that getting around this issue isn’t impossible.

Following fixes will assist you big time.

9 Best Possible Methods to Fix “Ethernet Doesn’t Have A Valid IP Configuration” Error on Windows 10

Losing access to your Ethernet connection is a big turn-off. However, kick back and relax as there are a good number of methods that will get you through this frustrating issue.

Here are the top methods that are guaranteed to help you immensely in fixing the invalid IP configuration issue.

Let’s get started without further ado!

Method 1: First Things First – Restart Your Computer System

When it comes to solving tech-related errors, always start with the easiest approaches. Restarting your computer system has phenomenal effects on any error.

First, you need to make sure to save all the work and then proceed to follow these steps:

1. Go to the Windows icon in the underlying taskbar.

2. Locate the Power icon on the front, click on it.

3. Select the Restart option from there.

4. Your computer will shut down and then it will automatically turn on.

5. Log in to your PC and check if you see the issue or not.

Method 2: Reset Your Router

Of course, there are higher chances of your issue being resolved by method 1. However, if things didn’t work out, then go for the second easiest method; reset your router or modem.

Here is how you do it:

1. Unplug your router or modem.

2. Leave your router unplugged for 3 to 5 minutes.

3. Now plug back your router and wait for the LED lights to flash. This ensures the power and activation status of your router.

4. Check your PC whether shows the same error or not.

Your takeaway is always to leave your router for 3 to 5 minutes so the IP configuration takes place completely. After that, you will get the most accurate connectivity status.

Method 3: Reset Your Network Adapter

Once you refresh your IP configuration settings, it is possible that your PC gets the valid IP address. Try resetting your network adapter for that.

Here is how you do it:

1. Open the Settings window by pressing the Windows key and I key simultaneously.

2. Go to the search bar and type Network Status.

3. Select the first option.

4. Locate the advanced network settings option.

5. Click on the change adapter options.

6. Right-click on your Ethernet connection.

7. Tap on the Disable option.

8. Leave it disabled for 2 to 3 minutes.

9. Select the Enable option to enable it back.

By now, you will receive a newly generated IP address that will replace the problematic one. Check whether the same issue persists or not.

Method 4: Turn Off the Fast Startup Feature of Windows 10

You wouldn’t even know but sometimes the Windows 10 features will be causing you tons of connectivity issues.

The Fast Startup feature comes as a default in Windows 10 to enable faster recovery from the random shutdown. This causes your PC to boot up faster.

IP address issues can be resolved by disabling this feature.

Here is how you disable the Fast Startup feature in Windows 10.

1. Go to the Windows and search Control Panel in there.

2. Click on the Control Panel app and it will be launched on your screen.

3. Make sure you change the view mode to large icons to see all the options available there with much clarity.

4. Locate the Power Options from the Control Panel items.

5. Select the link saying what the power buttons do locate on the left side of the Window.

6. Click on the link saying change settings that are currently unavailable. This step might require you to enter an administrator password.

7. Now here is the step you have come this far for, A page will appear that will list the Fast Startup option right under the Shutdown settings.

8. Uncheck the box saying Turn on fast startup (recommended) to disable this feature.

9. Now finally select the Save Changes option for this feature to be turned off.

10. Restart your computer to check your Ethernet connection.

That’s it. By applying this fix, the error code might just leave forever. It is one of the most recommended fixing methods.

Method 5: Reset TCP/IP

The network configuration of your computer takes a big turn when you reset the TCP/IP address once. This method potentially solves the Ethernet configuration error once and for all.

Resetting TCP/IP requires you to use Command Prompt and netsh Command.

Let’s see the steps for this highly recommended fix.

1. Press Windows plus S keys or simply go to the Search menu.

2. Type Command Prompt and hit Enter.

3. Now open up Elevated Command Prompt by right-clicking the Run as Administrator option.

4. It will ask you for permission access. Instantly click on the OK option to grant permission.

5. When the UAC (User Account Control) prompt appears, make sure to click yes. It lets the application make changes in the settings of your device. You can’t skip this step as it is necessary for launching the software.

6. As soon as the Elevated Command Prompt opens up, type and enter the mentioned commands.

7. Make sure you don’t forget to press the Enter key for each command.

8. The commands will start to execute when you hit the Enter key. Here are the commands:

netsh Winsock

reset netsh int IP reset

9. As soon as you enter the netsh Winsock command, you will get a notification asking you to turn off the PC. Ignore that message until you don’t enter the second command.

10. Now that you have entered both of the commands (netsh Winsock and reset netsh int IP reset) successfully, restart your computer and check if the Ethernet issue still appears.

Method 6: Run the Network Adapter Troubleshooter

When an unprecedented issue such as an Ethernet connection issue rises up, running a network adapter troubleshooter is going to be super helpful for you.

These integrated tools of Windows 10 facilitate troubleshooting.

Follow these steps to run the network adapter troubleshooter.

1. Press Windows and S keys together.

2. Type network adapter.

3. Click on the option Find and fix problems with your network adapter.

4. Click on the Advanced option.

5. Input your PC password for the Run as Administrator option.

6. Now tick the Apply repairs automatically option right after step 5.

7. Select Next.

8. Now click on your Ethernet network adapter from the given list.

9. You will be given relevant questions related to your IP configuration issue.

10. Complete answering the troubleshooting tool.

After that, you will get your Ethernet connection issue potentially resolved.

Method 7: Clear the Network Cache Memory

You are required to use the ipconfig command in Elevated Command Prompt.

The ipconfig command provides you the IP stack’s current configuration. When you use this command, the contents of the DNS client resolver cache get reset.

As a result, the DHCP configuration gets renewed. So, there are higher chances that your Ethernet connection will stop showing the IP error.

Here are the steps for this method:

1. Go to the Search bar.

2. Type Command Prompt and hit Enter key.

3. You may also press Windows + S keys simultaneously.

4. Now select the option Run as Administrator.

5. Elevated Command Prompt will appear on your screen.

6. A permission access will be displayed.

7. Grant permission by clicking OK.

8. Enter these Commands on the Elevated Command Prompt.

ipconfig /release

ipconfig /flushdns

ipconfig /renew

Ethernet Doesn't Have a Valid IP Configuration

9. Hit Enter button after inputting the commands one by one.

10. Now restart your PC and check if the IP address issue is fixed or not.

Method 8: Make Sure Your Firmware is Updated To Latest Version

Sometimes outdated firmware settings do not let you enjoy a smooth Ethernet connection. This is exactly why you need to keep the firmware updated on all of your devices.

For Example: modem, router, or repeaters.

Find their firmware updating instructions online from OEM and update them all to their newest versions.

Method 9: Update or Reinstall Your Network Adapter Driver

Updating or reinstalling the network adapter driver has a significant influence on your Ethernet connection. It is done by the Device Manager.

Let’s see how to do it.

1. Type Device Manager in the Search menu.

2. You may also press Windows and R keys to open Run.

3. Type hdwwiz.cpl in the search line.

4. Click OK.

5. Device Manager List will appear on the screen. You may see all the hardware devices connected to your PC there.

6. Locate the Network Adapters option.

7. Click the arrow to expand the Network Adapters option.

8. Right-click on your device.

9. Select Uninstall device.

10. A confirmation dialog box will appear.

11. Tick the small box beside Delete the driver software for this device.

12. Click on the Uninstall Drivers option.

13. Now restart your PC and check if the IP issue still exists.

In case the network adapter drivers are not installed on their own, then follow these steps:

1. Open Device Manager.

2. Right-click on your PC.

3. Click on Scan for hardware changes.

4. Missing drivers will be detected and installed.

That was the process of reinstalling network adapter drivers. Now, when it comes to updating them. All steps mentioned will be the same except for one step. You will have to select Update Drivers instead of Uninstall drivers. (Step 12)

That’s all, folks. Reinstalling and updating the network adapter drivers may potentially solve your issue.

Final Thoughts

Persistent Ethernet IP error messages such as “Ethernet Doesn’t Have a Valid IP Configuration” can really get on your nerves. However, applying few fixes can do the job for you.

We hope that the above-mentioned methods will be helpful for you.

Happy troubleshooting

Leave a Comment